As follows install mikrotik on a VPS that you have to do:
1. Login and Remote Server Using SSH
How to install proxy on a VPS, the first thing to do is log in to the server or VPS. When you arrive at the VPS management page, you can just search for SSH details first.
After that, you can open any terminal application you have. For example, you can choose a hosting champion that uses terminal software from the default Windows OS.
After that, you can also write the script "ssh root@-22". When you have written the script, you can just enter the VPS password and follow the next process.
2. Update Server Components
Install proxy on the next VPS, that is, you must update the server components. In this one way it is an option, but it is also important to avoid errors when running the next command. Ways to update components, namely:
Run the following script: 1 sudo apt-get update && sudo apt-get upgrade
After that, you can wait for a while first. The server can also update and install components that have not been installed before.
3. Mikrotik CHR installieren
The next step to install the VPS proxy, is to install the CHR proxy on the VPS. For this one method, you must install the CHR proxy software in the manner below:
Run a few lines of script first. Make sure that not a single character is missed in this method. For example, the following script must be filled in:
Wget https://download2.mikrotik.com/routeros/6.38.3/chr-6.38.3.img.zip -O chr.img.zip && \gunzip -c chr.img.zip > chr.img && \mount -o loop,offset=33554944 chr.img /mnt && \ADDRESS=`ip addr show eth0 | grep global | cut -d’ ‘ -f 6 | head -n 1` && \GATEWAY=`ip route list | grep default | cut -d’ ‘ -f 3` && \echo “/ip address add address=$ADDRESS interface=[/interface ethernet find where name=ether1]/ip route add gateway=$GATEWAY” > /mnt/rw/autorun.scr && \umount /mnt && \echo u > /proc/sysrq-trigger && \dd if=chr.img bs=1024 of=/dev/vda
● When the script has been run, the proxy installation process on the VPS can take place..
4. Restart Server VPS
For how to install proxy on the next VPS, namely restarting the VPS server. For this purpose, it is intended to be able to save the changes you have just made. The following steps must be taken to restart the VPS server:
● Go back to the VPS management page. After that, just find the VPS status section and click on the "reboot" menu button”.
● There is a pop up to confirm and follow the process..
● You should also wait for the reboot process to last at least 5 minutes.
● Also check the VPS indicator. When the VPS is complete, then the status changes to running.
5. install server Winbox and login Mikrotik
After rebooting the server, then to install Mikrotik on the next VPS, namely logging in to the Mikrotik OS. For ways that can be done, namely installing Winbox on a computer device. Some steps that can be done are:
● Download the Winbox software on the official Mikrotik website first. After that, install the software as usual.
● After that, you can open the Winbox application. Fill in all the connect fields with the VPS IP and login using the admin. After that, click on the "connect" column again.
In conclusion, to install Mikrotik on a VPS is one way that is easy for beginners to do. When each is confused, you can use one of the hosting services. By using the sequence of how to install the proxy on the VPS above, it can be successful and only takes approximately
